solar panels Archives - Page 13 of 15 - Professional Distributed PV Module Manufacturer

The technology to reduce the cost and increase the efficiency of photovoltaic modules – Shingled

In recent years, how to continuously reduce the cost per kWh of photovoltaic power generation is the focus of PV business and customers, and is also a necessary path to achieve carbon neutrality. By improving the efficiency of PV cells, the cost of…

By Brian 2023年 5月 12日About Solar Panel, Solar Technology

Necessary accessories for PV installation: brackets

Different siting scenarios for PV power plants require consideration of different power plant layout design options. In PV power system design, the way the module array supports are operated has a great impact on the total solar radiation received by the power generation…

By Brian 2023年 5月 10日About Solar Panel

Smart microgrids consist of these components

The concept of smart microgrid has become hot in recent years, so what exactly is a smart microgrid? What are its components? What are the application scenarios? You must have questions about it. In this article, we will reveal them all for you.First…

By Brian 2023年 5月 8日About Solar Panel, Industrial News, Solar Technology

Where should scrap PV panels from several countries go?

Nowadays, while the PV business is developing vigorously, the recycling business of PV modules is also maturing. From the point of view of material composition, used solar panels have great recycling value, which is conducive to achieving real green in the whole life…

By Brian 2023年 5月 6日About Solar Panel1 Comment

Several common faults and solutions for PV systems

Component failure 1. Hot spot effectThis refers to a certain condition, in the power generation state of the photovoltaic module series branch circuit is blocked or defective area is used as a load, consumption of other light area generated energy, resulting in local…

By Brian 2023年 4月 27日About Solar Panel

Photovoltaic module manufacturing process: half-sheet cutting

Efficiency is always the key to the photovoltaic industry, but as the efficiency of the cell increases, the increase in current in the series circuit brings about greater resistance power loss, which makes the development of the cell module encounter a bottleneck. How…

By Brian 2023年 4月 19日About Solar Panel

Important parameter for designing PV system: DC/AC ratio

There are many technical parameters that need to be considered when designing a PV system, such as tilt angle, azimuth angle, module spacing, capacity ratio and other equipment technical parameters, of which the capacity ratio is a parameter that needs to be considered.…

By Brian 2023年 4月 12日About Solar Panel

Does the PV system affect the RF signal?

First, let's be clear: solar panels do not have a direct effect on RF signals, but PV systems have the potential to interfere with signals. So, why would this problem arise? How should users (especially home users who install household distributed PV) deal…

By Brian 2023年 4月 10日About Solar Panel

Common problems of photovoltaic backsheet: bubbles, bulging…

The long-term stability of photovoltaic modules is key to the continuous production of electricity from a photovoltaic system. As an important part of the PV panel, the backside protects the cells, but there are some common problems during production and later use. Below…

By Brian 2023年 4月 6日About Solar Panel

Why do solar panels need to be placed at an angle?

As mentioned in many articles in the past, the position and angle of PV panel placement during the installation process has a very important impact on improving the efficiency of PV modules, and it directly affects the amount of electricity generated by PV…

By Brian 2023年 4月 4日About Solar Panel